Electromagnets
Electrical access control in the form of a magnet is usually called an electromagnet or an adhesive magnet. Sometimes the term door magnet is also used for this, but it is not electric and only serves to keep a door closed, locking for control is not possible. When buying a door adhesive magnet make sure that the magnet is strong and of high quality, in addition, there is a difference between door magnets outside or inside.
-
Conas ML-60 Electromagnetic Lock, 60KgConas ML60 is an electromagnetic lock for indoor access control.
• Magnet: 80 x 33 x 20mm
• Steel Plate: 80 x 24 x 9.3mm
• Led Indication: No
• Status Output: No
• Weather-Resistant: No
• Voltage: 12V (300mA)
• Holding Force: 60KG€55.00 €45.45 -
Conas ML-70 Electromagnetic Lock, 70KgConas ML70 is an electromagnetic lock for indoor access control.
• Magnet: 90 x 33 x 20mm
• Steel Plate: 90 x 24 x 9.3mm
• Led Indication: No
• Status Output: No
• Weather-Resistant: No
• Voltage: 12V (300mA) / 24V (150mA)
• Holding Force: 70KG€68.00 €56.20 -
![Conas ML2801L Electromagnet surface-mounted, 280Kg + LED]()
Conas ML2801L Electromagnet surface-mounted, 280Kg + LEDThe Conas ML2801L is an electromagnetic lock for indoor access control.
• Magnet: 250 x 48,5 x 25mm
• Steel plate: 190 x 45 x 11mm
• Led Indication: Yes
• Status Output: Yes
• Weather-Resistant: No
• Voltage: 12V (500mA) / 24V (250mA)
• Holding Force: 280Kg€144.00 €119.01 -
Conas ML280M Electromagnet flush-mounted, 280KgThe Conas ML280M is an electromagnetic lock for indoor access control.
• Magnet: 231,6 x 41,6 x 24.5mm
• Steel plate: 180 x 38 x 11mm
• Led Indication: No
• Status Output: No
• Weather-Resistant: No
• Voltage: 12V (500mA) / 24V (250mA)
• Holding Force: 280Kg€108.00 €89.26 -
Conas ML2802L double Electromagnetic Lock, 280kg + LEDThe Conas ML2802L is a surface mountd double electronic magnet for indoor access control.
• Magnet: 500 x 48,5 x 25mm
• Steel plate: 180 x 38 x 11mm
• Led Indication: Yes
• Status Output: Yes
• Weather-Resistant: No
• Voltage: 12V (1A) / 24V (500mA)
• Holding Force: 280Kg€267.00 €220.66 -
Conas ML3501L Electromagnet surface-mounted, 350Kg + LEDThe Conas ML3501L is an electromagnetic lock for indoor access control.
• Magnet: 260 x 55 x 27.5mm
• Steel plate: 190 x 45 x 11mm
• Led Indication: Yes
• Status Output: Yes
• Weather-Resistant: No
• Voltage: 12V (480mA) / 24V (240mA)
• Holding Force: 280Kg€158.00 €130.58 -
Conas ML350W Electromagnet surface-mount, 350Kg weatherproofThe Conas ML350W is an electromagnetic lock for (outdoor) access control.
• Magnet 228 x 47 x 29mm (LxWxH)
• Steel Plate: 190 x 45 x 11mm
• Led Indication: No
• Status Output: No
• Weatherproof: Yes
• Voltage: 12V (480mA) / 24V (240mA)
• Holding Force: 350Kg€231.00 €190.91 -
![Conas ML350MW Electromagnet flush-mount, 350Kg weatherproof]()
Conas ML350MW Electromagnet flush-mount, 350Kg weatherproofThe Conas ML350MW is an electromagnetic lock for (outdoor) access control.
• Magnet: 273 x 44 x 27.2mm
• Steel Plate: 190 x 45 x 11mm
• Led Indication: No
• Status Output: No
• Weatherproof: Yes
• Voltage: 12V (480mA) / 24V (240mA)
• Holding Force: 350Kg€231.00 €190.91 -
Conas ML5001L Electromagnet surface-mount, 500Kg + LEDThe Conas ML5001L is an electromagnetic lock for (indoor) access control.
- • Magnet: 265 x 71.8 x 38.8mm
- • Steel Plate: 185 x 60 x 13mm
- • Led Indication: Yes
- • Status Output: Yes
- • Weatherproof: No
- • Voltage: 12V (420mA) / 24V (210mA)
- • Holding Force: 500Kg
€206.00 €170.25 -
Conas ML500MW Electromagnet flush-mounted, 500Kg weatherproofThe Conas ML500MW is an electromagnetic lock for (outdoor) access control.
• Magnet: 254 x 65.8 x 38.8mm
• Steel Plate: 185 x 60 x 13mm
• Led Indication: No
• Status Output: No
• Weatherproof: Yes
• Voltage: 12V (480mA) / 24V (240mA)
• Holding Force: 500Kg€278.00 €229.75 -
Conas ML500W Electromagnet surface-mount, 500Kg weatherproofThe Conas ML500W is a weatherproof electromagnet for (outdoor) access control.
• Magnet: 230 x 69 x 39mm
• Steel Plate: 185 x 60 x 13mm
• Led Indication: No
• Status Output: No
• Weatherproof: Yes
• Voltage: 12V (500mA) / 24V (250mA)
• Holding Force: 500Kg€278.00 €229.75 -
Conas ML5002L Double Electromagnet, 500Kg + LEDConas ML5002L is an electromagnetic lock for indoor access control.
- Magnet: 530 x 71.8 x 38.8 mm (L x W x H)
- Steel Plate: 185 x 60 x 13 mm
- Voltage: 12V DC or 24V DC
- Led Indication: Yes
- Status Output: Yes
- Holding Force: 500KG
€398.00 €328.93
A Conas electromagnet
A Conas electromagnet or adhesive magnet are available in a wide range from 60 to 500 kg. When powered, the magnet is energized and active (closed). If the electromagnet on the front is equipped with an LED, the status of the magnet can be checked. When the magnet is active and closed, it will be yellow/green. If the electromagnet is not active, the LED is red. The electromagnets can be powered on 12V or 24V as an adhesive magnet and you can choose from both built-in and surface-mounted electromagnets. They are perfect to use as fire door adhesive magnets.
Our range of Conas adhesive magnets offers the following options:
- Pulling force - from 60 to 500kg;
- Voltage - the electromagnets can be powered on both 12V and 24V;
- Weather resistance - also check the weatherproof electromagnets for outdoor applications;
- Mounting - you can choose from both flush- and surface-mounted electromagnets;
- Status Led - on the front an LED with which you can check the status of the magnet;
- Brackets - for mounting on glass doors.
Electromagnet for access control
The following locking mechanisms are commonly used in access control: electromagnet, bolt lock or electric strike. It is important to determine which form of access control is best for you. This will depend on which mounting form is easiest or is already present. Or which mechanism is least susceptible to sabotage. But the most important thing is what should be the behavior of the electromagnet in case of fire or emergency.
Here you should think of the terms 'Normally Open / Fail Safe' and 'Normally Closed / Fail Secure'. An electromagnet is normally 'Normally Open / Fail Safe', so always unlocked without voltage. For example, in the event of a fierce fire, the power can fail and the emergency exits open automatically. But it may also be the case that all emergency exits equipped with an electromagnet must open in the event of a fire. The access control system receives the alarm by means of a fire detector (in the event of a fire). order to open all doors, ie to de-energize the electromagnet. For a fire door a minimum of 180 kg, possibly with LED indication, is a good choice.
Want to buy an electromagnet?
Credex Alarm Systems has a wide range of adhesive magnets of indestructible quality. Would you like to know more about our adhesive magnets for access control in your home, business or van? Please feel free to contact to us.
Have a more general question? Be sure to take a look at our FAQ in which the most common questions are answered.
