Ajax HomeSiren, Indoor siren

Ajax HomeSiren, Indoor siren

The device notifies of detector activation with an audible alarm. Sound level and alarm length are set in the mobile application.

Features Ajax HomeSiren

Connector for external LED is available. It can be mounted outside your apartment or office to monitor the security system status.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Specifications Ajax HomeSiren

• Color: White
• Device type: Wireless
• Use: Indoor
• Alarm type: Sound
• External LED connector: Yes
• Sound alarm volume: Adjustable, 81-105 dB at the distance of 1 m
• Working frequency of piezo buzzer: 3.5±0.5 kHz
• Arm/disarm/armed state indication: Yes
• Power supply: From on-board batteries
• Battery type: 2 CR123A batteries, 3 V
• Battery indicator: Yes
• Battery life: Up to 5 years
• Standby current: 70 µA (when polling every 36 seconds)
• Tamper protection: Available
• Radio signal power: 25 mW
• Communication protocol: Jeweller (868.0-868.6 MHz)
• Maximum distance between detector and central unit: Up to 2,000 m (6,552 ft) (in open area)
• Polling interval: 12-300 sec (adjustable)
• Alarm triggering time: Less than a second
• Customizable alarm duration: Between 3 sec and 3 min
• Ingress protection: IP50
• Working temperature range: From 0°С (+32°F) to +50°С (+122°F)
• Operating humidity: Up to 75%
• Dimensions: 75х75,6х26,6 mm (2.95×2.98×1.02 in)
• Weight: 96 g