Ajax StreetSiren, wireless Outdoor siren with LED

Ajax StreetSiren

The device notifies of detector activation with an audible alarm and LED. Sound level and alarm length are set in the mobile application.

Features

The device has IP54 dust and moisture protection. 12 V DC external power supply can be connected, if necessary. The built-in accelerometer will raise the alarm if an attempt is made to remove the siren.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Specifications Ajax StreetSiren

• Device type: Wireless
• Use: Indoor/Outdoor
• Alarm type: Light and sound
• Sound alarm volume: Adjustable, 85-113 dB at the distance of 1 m
• Working frequency of piezo buzzer: 3.5±0.5 kHz
• Light alarm: Red LED
• Arm/disarm/armed state indication: Yes
• Power supply: From on-board batteries / or external 12V DC
• Battery type: 4 CR123A batteries, 3V
• Battery indicator: Yes
• Battery life: Up to 5 years
• External power supply: DC 12 V±20%
• Standby current: 70 µA (when polling every 36 seconds)
• Maximum alarm current: 1,45 А (max. volume)
• Maximum power consumption: From batteries – 4.35 W, external source DC 12V – 13.5 W
• Tamper protection: Available
• Dismount protection: Accelerometer
• Radio signal power: 25 mW
• Communication protocol: Jeweller (868.0−868.6 MHz)
• Maximum distance between detector and central unit: Up to 2,000 m (6,552 ft) (in open area)
• Polling interval: 12-300 sec (adjustable)
• Alarm triggering time: Less than a second
• Customizable alarm duration: Between 3 sec and 3 min
• Ingress protection: IP54
• Working temperature range: From -20°С (-4°F) to +50°С (+140°F)
• Operating humidity: Up to 95%
• Dimensions: 200 х 200 х 51 mm (7.87×7.87×2 in)
• Weight: 502 g