Relay + Modules

Jablotron JB-161N-PLUG is a smart socket with indication LED.

Smart, wireless, bi-directional communicating plugs are an entirely new solution for automation within the JABLOTRON 100+ system. The plug copies the selected PG output.

Jablotron JB-163N-PLUG is a smart socket with external output (Schuko).

Permanently powered Schuko-type wireless pass-through plug with signal output.

Check HERE for garage door control

The Jablotron JA-150N is wireless PG power output module (max 16A, 250V AC). It copies the state of a selected PG output in the JA-100 system (PG 1 to PG 32). Powered by 230V AC.

Size: 82 x 50 x 19mm.

The Jablotron JA-151N is wireless PG power output relay module (max 2A, 50V AC / 60V DC). It copies the state of a selected PG output in the JA-100 system (PG 1 to PG 32). Powered by 12 - 24V DC.

Size: 82 x 50 x 16mm

The Jablotron JB-110N BUS power output module offers a switching relay (max 8A, 250V AC / 24V DC) with NO or NC modes.

The Jablotron JB-111N BUS signal output module PG offers a switching relay (max 2A, 50V AC / 60V DC) with NO or NC modes.

The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

Jablotron JA-160-C mounting-box-fitted wireless multi-functional power relay, it can be installed as a stand-alone device without a link to a control panel.

Switching relay with galvanic safety separation for 230V / 16A power loads.

Jablotron AC-160 DIN wireless multi-functional relay for DIN-rail installation, it can be installed as a stand-alone device without a link to a control panel.

The JA-110N-PG-DIN module is designed for a DIN rail and provides a power relay output.

The relay is programmable by the control panel PG outputs.

The Jablotron JA-162M is a wireless module featuring two independent universal inputs and the option to connect a tamper contact.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system bus to an RS-485 serial line and vice versa.

Size: 52 x 38 x 14mm

JA-KNX is a KNX gateway for the Jablotron 100 alarm systems.

It enables bidirectional communication using the RS485 communication module (JA-121T) from Jablotron.

There are 2 models: standard or DIN-Rail.

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

The JA-150G-CO wireless module for connection of an Ei208(D)W CO detector. 

The Jablotron JA-190PL multipurpse installation box for JA-100 modules.

Suitable for: JA-110T, JA-110Z, JA-110Z-B, JA-110N, JA-111N, JA-150N, JA-151N, JA-121T, JA-118N, JA-120N.

Size: 90 x 90 x 35mm

The Jablotron JA-194PL multipurpse installation box for JA-100 modules.

Supported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110N, JA-111N, JA-150N, JA-118N, JA-110T, JA-110Z, JA-110Z-B, JA-110Z-D.

Size: 182 x 132 x 45mm

The Jablotron JA-195PL multipurpse installation box for JA-100 modules.

Supported modules: JA-110N, JB-110N, JA-150N, JA-111N, JB-111N, JA-151N, JA-118N, JB-118N, JA-118M, JA-121T, JA-111H-AD TRB, JA-111H TRB, JA-110T, JA-110Z-B/C.

Size: 102 x 102 x 34mm

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The Jablotron Smart-Hub for home automation.