Conas EB-007A Electric Bolt Lock up to 1000 KG, Fail-Safe

Conas EB-007A Electric Bolt Lock up to 1000 KG, Fail-Safe

The EB-007A is an electric bolt lock with multiple functions and operates according to the fail-safe principle.

The bolt is pushed out of the mechanism as soon as the lock is activated by means of the magnet: the magnet is mounted on the supplied strike plate. The strike plate is placed on the moving / opening part of a window or door. The bolt is made of hardened steel and 17mm thick. The bolt pen has a maximum holding force of 1000 kg.

The bolt lock must be connected to a stabilized power supply such as the VP-PA002-EU or an access control unit such as the AC-150NET.

By using the dipswitches on the model, you can set an auto-lock delay time. This causes the pen to slide out 0, 3, 6 or 9 seconds after the magnet has made contact.

The EB-007A has a Normally Closed (NC) and COM output. The model is also provided with a status indicator output for showing the closing status of the bolt.

Conas EB-007A electric Bolt Lock

• Face plate: 205 x 30 x 3 mm (LxWxH);
• Strike plate: 100 x 25 x 3 mm (LxWxH);
• Body: 205 x 30 x 38 mm (LxWxH);
• Bolt: 17mm diameter, stainless steel, throw 16mm;
• Voltage: DC12V; Start power consumption: 1200mA; Standby power consumption: 200mA;
• Pen / Bolt holding strenght: 1000 kg;
• Suitable for: aluminum, wooden, metal and glass doors / windows;
• Output: deur status indicator - NO / COM;
• Autolock Time Delay: 0.3.6.9 sec.

Wiring

- Power connection is done with Red and Black.
- Orange wire is to open the lock (pin goes inwards).
- Green and White wire are used to see if the door is closed: i.e. the magnet in the strike plate faces the face place.
- The Blue, Brown and Gray wires are used to indicate if the lock pin is in or out.
- With no power the pin stays in (unlocked).