Tyco TL405LE Universal 4G/IP communicator
Tyco DSC TL405LE Universal 4G/IP Dual Path communicator with ABS housing. Universal dialer for voice and SMS messages.
Dimensions: 101 x 186 x 41 mm
Tyco DSC TL405LE Universal 4G/IP communicator with ABS housing
The TL405LE is a universal DSC communicator for sending alarms over 4G /IP. This communicator is ideal for revitalizing outdated alarm systems. An analog PSTN line is becoming less available and by installing the TL405LE an analog line can be simulated, so you can still send alarms to older systems. Optionally, this can also be done digitally with a GPRS/HSPA (4G) connection.
In addition to translating CiD codes, the communicator can do more. On the board one has the possibility to set 6 terminals as input or output. This makes it possible to use the communicator as a small alarm system with a number of detectors.
In addition, you can also think of practical controls, such as opening a gate or door remotely, by means of an SMS message. The TL405LE supports up to 32 SMS messages and 8 phone numbers for control (authorization). In addition, there is also a possibility to control an output by phone call, here you can set 32 phone numbers for control (authorization).
Specifications DSC TL405LE
- Universal dialer for voice and SMS messages
- Translated CiD to voice calls
- Translates CiD to SMS messages
- Supports both Sia and Contact ID
- Communicator can be programmed in DLS5 software by USB cable
- Equipped with 6 programmable open collector outputs or inputs
- Equipped with an internal antenna, connector for extending the antenna is available.
- Supports GSM band 900/1800 and UMTS 900/2100
- Equipped with a tamper switch and anti-jamming function
- Power consumption: 90mA standby; 230ma in standard mode
- Optional backup battery available for 6 hours backup time
- Dimensions: 101 x 186 x 41 mm
- Complies with EN50136
Customer Reviews
Product Questions
Regatds
IP communication is by LTE network
If no Surgard receiver is used on the alarm receiving center side, the dialer will not be able to send notifications.
The product is absolutely not compatible with a universal receiver to generate reports via SIA DC-09.
Regards