Jablotron CT-01 Shutter Movement Detector

Jablotron CT-01 Shutter Movement Detector

The CT-01 is wired detector for detecting the unauthorised movement of external window shutters on houses or buildings. The string movement turns a ratchet wheel and triggeres a contact inside which makes a series of open – closed pulses at the terminals.
The CT-01 wired outputs can be connected to the wired input of a OASiS JA-81M door detector to connect the CT-01 signals to the OASiS alarm system. False alarms caused by the wind moving the shutters are avoided by the door detector only raising the alarm when at least 3 pulses are received from the CT-01 within 5 seconds.

Key features:

• The CT-01 is wired detector intended to detect the unauthorised movement of external shutters on houses or buildings.
• When the shutters are forced this will be detected and the alarm can react, even before the intruder is inside!
• False alarms caused by the wind causing the shutters to move only slightly are avoided as alarms only occur when at least 3 pulses are received within 5 seconds.

Specifications CT-01:

• Output contact of detector: 100 mA / 60V
• Range: 5 to 260 cm
• Dimensions: 94 x 102 x 17 mm
• Environment according to EN 50131-1: III. III. outside protected Outdoor protection
• Temperature range: -25 to +50°C -25 to 50°C